---

---

(i)	DBM Global Inc. ("DBMG") (Construction), a family of companies providing fully integrated structural and steel construction services;

(ii)	Global Marine Systems Limited ("GMSL") (Marine Services), a leading provider of engineering and underwater services on submarine cables;

(iii)	American Natural Gas ("ANG") (Energy), a compressed natural gas fueling company;

(iv)	PTGi-International Carrier Services Inc. ("ICS") (Telecommunications), a provider of internet-based protocol and time-division multiplexing access and transport of long-distance voice minutes;

(v)	Continental Insurance Group Ltd. ("CIG") (Insurance), a platform for our run-off long-term care and life and annuity business, through its insurance company, Continental General Insurance Company ("CGI" or the "Insurance Company");

(vi)	Pansend Life Sciences, Ltd. ("Pansend") (Life Sciences), our subsidiary focused on supporting healthcare and biotechnology product development; and

(vii)	Other, including controlling interests in 704Games Company (f/k/a DMi, Inc.) ("704Games"), which owns licenses to create and distribute NASCAR® video games and HC2 Broadcasting Holdings Inc. ("Broadcasting"), which strategically acquires broadcasting assets across the United States. In addition, Other includes noncontrolling interests in various investments.

---

•

Pursue Large, Value-Added Design-Build Projects: DBMG’s unique ability to offer design-build services, a full range of steel construction services and project management capabilities makes it a preferred partner for complex, design-build fabrication projects in the geographic regions it serves. This capability often enables DBMG to bid against fewer competitors in a less traditional, more negotiated selection process on these kinds of projects, thereby offering the potential for higher margins while providing overall cost savings and project flexibility and efficiencies to its customers;

•

Expand and Diversify Revenue Base: DBMG is seeking to expand and diversify its revenue base by leveraging its long-term relationships with national and multi-national construction and engineering firms, national and regional accounts and other customers. DBMG also intends to continue to grow its operations by targeting smaller projects that carry higher margins and less risk of large margin fluctuations. DBMG believes that continuing to diversify its revenue base by completing smaller projects - such as low-rise office buildings, healthcare facilities and other commercial and industrial structures - could reduce the impact of periodic adverse market or economic conditions, as well as the margin slippage that may accompany larger projects;

•

Emphasize Innovative Services: DBMG focuses its BIM modelling, design-build, engineering, detailing, fabrication and erection expertise on larger, more complex projects, where it typically experiences less competition and more advantageous negotiated contract opportunities. DBMG has extensive experience in providing services requiring complex BIM modelling, detailing, fabrication and erection techniques and other unusual project needs, such as BIM coordination, specialized transportation, steel treatment or specialty coating applications. These service capabilities have enabled DBMG to address such design-sensitive projects as stadiums and uniquely designed hotels and casinos; and

•

Diversify Customer and Product Base: Although DBMG seeks to achieve a leading share of the geographic and product markets in which it traditionally competes, it also seeks to diversify its product offerings and geographic markets through acquisition. By expanding the portfolio of products offered and geographic markets served, DBMG believes that it will be able to offer more value-added services to existing and new potential customers, as well as to reduce the impact of periodic adverse market or economic conditions.

---

•	BIM: DBMG uses BIM on every project to manage its role efficiently. Additionally DBMG’s use of SIMS in conjunction with BIM allows for real-time reporting on a project’s progress and an information-rich model review.

•	Design-Assist/Design-Build: Using the latest technology and BIM, DBMG works to provide clients with cost-effective steel designs. The end result is turnkey-ready, structural steel solutions for its diverse client base.

•	Pre-Construction Design and Budgeting: Clients who contact DBMG in the early stages of planning can receive a DBMG-performed analysis of the structure and cost breakdown. Both of these tools allow clients to accurately plan and budget for any upcoming project.

•	Steel Management: Using DBMG’s proprietary Schuff Steel Integrated Management System ("SIMS"), DBMG can track any piece of steel and instantly know its location. Additionally, DBMG can help clients manage steel subcontracts, providing clients with savings on raw steel purchases and giving them access to a variety of DBMG-approved subcontractors.

•	Fabrication: Through its nine fabrication shops in California, Arizona, Texas, Kansas, Georgia, and Utah, DBMG has one of the highest fabrication capacities in the United States, with over 1.3 million square feet under roof and a maximum annual fabrication capacity of approximately 318,000 tons.

•	Erection: Named the top steel erector in the United States for 2007, 2008, 2011, 2013, 2014, 2015, 2016, and 2017 by Engineering News-Record, DBMG knows how to add value to its projects through the safe and efficient erection of steel structures.

---

•	Strainers: Temporary cone and basket strainers, tee-type strainers, vertical and horizontal permanent line strainers and fabricated duplex strainers.

•	Measurement Equipment: Orifice meter tubes, orifice plates, orifice flanges, seal pots, flow nozzles, Venturi tubes, low loss tubes and straightening vanes.

•	Major Products: Spectacle blinds, paddle blinds, drip rings, bleed rings, and test inserts, ASME vessels, launchers and pipe spools.

•	Steel Detailing: Utilizing industry leading technologies, PDC provides steel detailing services which include: shop drawings, erection plans, anchor bolt drawings, connection sketches, DSTV files for cutting and drilling, DXF files for plate work, field bolt lists, specialist reports and advance bill of material and piping.

•

BIM Modelling: Through multidisciplinary teams, PDC creates highly accurate, scaled virtual models of each structural component. These independent models and data are integrated and standardized to produce a single 3D model simulation of the entire structure. This integrated model contains complete information for all functional requirements of a project, including procurement and logistics, financial modelling, claims and litigation, fabrication, construction support and asset management.

•

BIM Management: PDC is an industry leading provider of BIM management consultancy services ("BIM Management"), with clients ranging from government, industry organizations and general construction contractors. BIM Management of all project participants’ input, use and development of the applicable model is integral to ensuring that the model remains the single point of reference. PDC’s BIM Management service includes the governing of process and workflow management, which is a collection of defined model uses, workflows, and modelling methods used to achieve specific, repeatable and reliable information results from the model. The way the model is created and shared, and the sequencing of its application, impacts the effective and efficient use of BIM for desired project outcomes and decision support.

•

Bridge Steel Detailing: Utilizing industry leading technologies, PDC, through its wholly owned subsidiary Candraft Detailing, provides steel detailing services for bridges which include: shop drawings, erection plans, anchor bolt drawings, connection sketches, DSTV files for cutting and drilling, DXF files for plate work, field bolt lists, specialist reports and advance bill of material and piping.

•	Steel Detailing: Utilizing industry leading technologies, BDS provides steel detailing services, including: shop drawings, erection plans, anchor bolt drawings, connection sketches, DSTV files for cutting and drilling, DXF files for plate work, field bolt lists, specialist reports, advance bill of material and piping.

•

BIM modelling: Through multidisciplinary teams, BDS creates highly accurate, scaled virtual models of each structural component. These independent models and data are integrated and standardized to produce a single 3D model simulation of the entire structure. This integrated model contains complete information for all functional requirements of a project, including procurement and logistics, financial modelling, claims and litigation, fabrication, construction support and asset management.

•

Rebar Detailing: These services, including rebar detailing and estimating, are delivered by a staff experienced in rebar installation and familiar with the construction practices and constructibility issues that arise on project sites. Deliverables include: field placement/shop drawings, field and/or phone support, 2D and 3D modelling, connection sketches, bar listing in ASA format, DGN files, and complete rebar estimating.

---

---

•	Developing opportunities in the offshore power market;

•	Diversifying the business by pursuing growth within its three market segments (telecommunications, offshore power, and oil and gas), which it believes will strengthen its quality of earnings and reduce exposure to one particular market segment;

•	Retaining and building its leading position in telecommunications maintenance and installation;

•	Working to develop convergence of its maintenance services across all three market segments; and

•	Pursuing targeted mergers and acquisitions, joint ventures, partnerships and opportunities to build a larger operating platform that can benefit from increased operating efficiencies.

---

---

---

---

---

---

•	Trade Shows: ICS attends industry trade shows around the globe throughout the year. At each trade show ICS markets to both existing and potential new customers through prearranged meetings, social gatherings and networking; and

•	Business Development: ICS's world class sales team focuses on developing ICS’s business potential around the globe through ongoing communication and face-to-face meetings.

---

---

•	Future acquisitions of long-term care businesses and/or closed blocks of long-term care policies;

---

---

---

•

BeneVir Biopharm, Inc. ("BeneVir"), a development stage company focused on the development of a patent-protected oncolytic virus, BV-2711, for the treatment of solid cancer tumors. BeneVir’s pre-clinical pipeline consists of oncolytic viruses delivered locally or systemically. Once inside tumors, the viruses are designed to selectively destroy cancer cells, evade elimination by the immune system, and activate multiple classes of anti-tumor immune cells. This multi-mechanistic approach builds upon key elements of both oncolytic virus and immune-checkpoint inhibitor approaches to cancer treatment and is designed to block the major methods that tumors use to subvert the immune system. BeneVir holds an exclusive worldwide license for BV-2711, a patent-protected novel compound;

•

R2 Dermatology, Incorporated ("R2"), a company developing medical devices for the treatment of aesthetic and medical skin conditions. In July 2017, R2 received notification from the United States Food and Drug Administration of market clearance of R2's second generation device, the R2 Dermal Cooling System. The R2 Dermal Cooling System is a cryosurgical instrument intended for use in dermatologic procedures for the removal of benign lesions of the skin, based on exclusive licensing rights to a novel technology developed at Massachusetts General Hospital and Harvard Medical School;

•	Genovel Orthopedics, Inc. ("Genovel"), a company developing novel partial and total knee replacements for the treatment of osteoarthritis of the knee based on patent-protected technology invented at New York University School of Medicine;

•

MediBeacon, Inc. ("MediBeacon"), a company developing a proprietary non-invasive real-time monitoring system for the evaluation of kidney function. This system (known as the MediBeacon Optical Renal Function Monitor system) uses an optical skin sensor combined with a proprietary agent that glows in the presence of light. It will be the first and only, non-invasive system to enable real-time, direct monitoring of renal function at point-of-care. On March 2, 2017, MediBeacon announced the successful completion of a real-time, point of care renal function clinical study on subjects with impaired kidney function at Washington University in St. Louis. On June 8, 2016, MediBeacon announced the completion of the acquisition of Mannheim Pharma & Diagnostics, a life science company based in Mannheim, Germany. Recently, MediBeacon announced a collaborative research project with scientists at Washington University School of Medicine in St. Louis, Missouri in a research project aimed at improving the understanding of childhood malnutrition and its related problems, including stunted growth. The work is funded by a Grand Challenges Explorations Phase II grant from the Bill & Melinda Gates Foundation to Washington University. It is a follow-up grant to work carried out through a Phase I Grand Challenges Explorations Award made in 2014. MediBeacon was also recently the recipient of a Small Business Innovation Research grant supported by the National Eye Institute of the National Institutes of Health (NIH). With this support, MediBeacon is pursuing research into the use of a MediBeacon fluorescent tracer agent to visualize vasculature in the eye. The focus of the NIH-supported project is to determine if a specific proprietary MediBeacon tracer agent when administered has the potential to provide additional clinical value versus the existing standard of care; and

•	Triple Ring Technologies, a research and development engineering company specializing in medical devices, homeland security, imaging sensors, optics, fluidics, robotics and mobile healthcare.

•	704Games f/k/a DMi, Inc. owns licenses to create and distribute NASCAR® video games 704Games has released three NASCAR® console games, and multiple NASCAR® mobile games.

•	Broadcasting strategically acquires broadcast assets across the United States. Broadcasting's vision is to capitalize on the opportunities to bring valuable content to more viewers over-the-air and position the Company for a changing media landscape.

---

---

•	incur liens on our property, assets and revenue;

•	borrow money, and guarantee or provide other support for the indebtedness of third parties;

•	redeem or repurchase our capital stock;

•	prepay, redeem or repurchase certain of our indebtedness, including our preferred stock;

•	enter into certain change of control transactions;

•	make investments in entities that we do not control, including joint ventures;

•	enter into certain asset sale transactions, including divestiture of certain Company assets and divestiture of capital stock of wholly-owned subsidiaries;

•	enter into certain transactions with affiliates;

•	enter into secured financing arrangements; and

•	enter into sale and leaseback transactions.

---

•	increased vulnerability to general adverse economic and industry conditions;

•	higher interest expense if interest rates increase on our floating rate borrowings are not effective to mitigate the effects of these increases;

•	our 11.0% Notes are secured by substantially all of HC2’s assets and those of certain of HC2’s subsidiaries that have guaranteed the 11.0% Notes, including certain equity interests in our other subsidiaries and other investments, as well as certain intellectual property and trademarks, and those assets cannot be pledged to secure other financings;

•	certain assets of our subsidiaries are pledged to secure their indebtedness, and those assets cannot be pledged to secure other financings;

•	our having to divert a significant portion of our cash flow from operations to payments on our indebtedness and other arrangements, thereby reducing the availability of cash to fund working capital, capital expenditures, acquisitions, investments and other general corporate purposes;

•	limiting our ability to obtain additional financing, on terms we find acceptable, if needed, for working capital, capital expenditures, expansion plans and other investments, which may limit our ability to implement our business strategy;

•	limiting our flexibility in planning for, or reacting to, changes in our businesses and the markets in which we operate or to take advantage of market opportunities; and

•	placing us at a competitive disadvantage compared to our competitors that have less debt and fewer other outstanding obligations.

---

•	re-measurement gains and losses from changes in the value of foreign denominated assets and liabilities;

•	translation gains and losses on foreign subsidiary financial results that are translated into U.S. dollars, our functional currency, upon consolidation; and

•	planning risk related to changes in exchange rates between the time we prepare our annual and quarterly forecasts and when actual results occur.

---

---

---

•	political conditions and events, including embargo;

•	restrictive actions by U.S. and foreign governments;

•	the imposition of withholding or other taxes on foreign income, tariffs or restrictions on foreign trade and investment;

•	adverse tax consequences;

•	limitations on repatriation of earnings and cash;

•	currency exchange controls and import/export quotas;

•	nationalization, expropriation, asset seizure, blockades and blacklisting;

•	limitations in the availability, amount or terms of insurance coverage;

•	loss of contract rights and inability to adequately enforce contracts;

•	political instability, war and civil disturbances or other risks that may limit or disrupt markets, such as terrorist attacks, piracy and kidnapping;

•	outbreaks of pandemic diseases or fear of such outbreaks;

•	fluctuations in currency exchange rates, hard currency shortages and controls on currency exchange that affect demand for our services and our profitability;

•	potential noncompliance with a wide variety of anti-corruption laws and regulations, such as the U.S. Foreign Corrupt Practices Act of 1977 (the "FCPA"), and similar non-U.S. laws and regulations, including the U.K. Bribery Act 2010 (the "Bribery Act");

•	labor strikes and shortages;

•	changes in general economic and political conditions;

•	adverse changes in foreign laws or regulatory requirements; and

•	different liability standards and legal systems that may be less developed and less predictable than those in the United States.

---

•	the difficulty of integrating acquired products, services or operations;

•	difficulties in maintaining uniform standards, controls, procedures and policies;

•	the potential impairment of relationships with employees and customers as a result of any integration of new management personnel;

•	difficulties in disposing of the excess or idle facilities of an acquired company or business and expenses in maintaining such facilities; and

•	the effect of and potential expenses under the labor, environmental and other laws and regulations of various jurisdictions to which the business acquired is subject.

---

---

•	significantly dilute the equity interest and voting power of all other stockholders;

•	subordinate the rights of holders of our outstanding common stock and/or preferred stock if preferred stock is issued with rights senior to those afforded to holders of our common stock and/or preferred stock;

•	trigger an adjustment to the price at which all or a portion of our outstanding preferred stock converts into our common stock, if such stock is issued at a price lower than the then-applicable conversion price;

•	entitle our existing holders of preferred stock to purchase a portion of such issuance to maintain their ownership percentage, subject to certain exceptions;

•	call for us to make dividend or other payments not available to the holders of our common stock; and

•	cause a change in control of our company if a substantial number of shares of our common stock are issued and/or if additional shares of preferred stock having substantial voting rights are issued.

---

---

---

---

---

---

---

---

---

---

---

---

•	failure to properly estimate costs of materials, including steel and steel components, engineering services, equipment, labor or subcontractors;

•	costs incurred in connection with modifications to a contract that may be unapproved by the customer as to scope, schedule, and/or price;

•	unanticipated technical problems with the structures, equipment or systems we supply;

•	unanticipated costs or claims, including costs for project modifications, customer-caused delays, errors or changes in specifications or designs, or contract termination;

•	changes in the costs of materials, engineering services, equipment, labor or subcontractors;

•	changes in labor conditions, including the availability and productivity of labor;

•	productivity and other delays caused by weather conditions;

•	failure to engage necessary suppliers or subcontractors, or failure of such suppliers or subcontractors to perform;

•	difficulties in obtaining required governmental permits or approvals;

•	changes in laws and regulations; and

•	changes in general economic conditions.

---

---

•	the terms and conditions upon which it purchases products from its suppliers, including applicable exchange rates, transport costs and other costs, its suppliers’ willingness to extend credit to it to finance its inventory purchases and other factors beyond its control;

---

---

---

•	cargo and property losses or damage as a result of the foregoing or less drastic causes such as human error, mechanical failure and bad weather;

•	business interruptions and delivery delays caused by mechanical failure, human error, war, terrorism, political action in various countries, labor strikes or adverse weather conditions.

---

---

•	oil and natural gas prices, including volatility of oil and natural gas prices and expectations regarding future prices;

•	the inability of our customers to access capital on economically advantageous terms;

•	technological advances that make subsea cable communications less attractive or obsolete;

•	the consolidation of our customers;

•	customer personnel changes; and

•	adverse developments in the business or operations of our customers, including write-downs of reserves and borrowing base reductions under customer credit facilities.

---

•	unexpectedly long delivery times for, or shortages of, key equipment, parts or materials;

•	shortages of skilled labor and other shipyard personnel necessary to perform the work;

•	shipyard delays and performance issues;

•	failures or delays of third-party equipment vendors or service providers;

•	unforeseen increases in the cost of equipment, labor and raw materials, particularly steel;

•	work stoppages and other labor disputes;

•	unanticipated actual or purported change orders;

•	disputes with shipyards and suppliers;

•	design and engineering problems;

•	latent damages or deterioration to equipment and machinery in excess of engineering estimates and     assumptions;

•	financial or other difficulties at shipyards;

•	interference from adverse weather conditions;

•	difficulties in obtaining necessary permits or in meeting permit conditions; and

•	customer acceptance delays.

---

---

•	power loss; and

---

•	municipal or regional political events or local rulings;

•	our ability to obtain permits to use public rights of way;

•	state municipal elections and change of local government administration;

•	our ability to generate cash flow or to obtain future financing necessary for such build-out;

•	unforeseen delays, costs or impediments relating to the granting of municipal and state permits for our build-out; and

•

delays or disruptions resulting from physical damage, power loss, defective equipment or the failure of third party suppliers or contractors to meet their obligations in a timely and cost−effective manner; and regulatory and political risks, such as the revocation or termination of our concessions, the temporary seizure or permanent expropriation of assets, import and export controls, political instability, changes in the regulation of telecommunications and any future restrictions or easing of restrictions on the repatriation of profits or on foreign investment.

---

•	we may not have implemented company policies, procedures and cultures, in an efficient and effective manner;

•	we may not be able to successfully reduce costs, increase advertising revenue or audience share;

•	we may fail to retain and integrate employees and key personnel of the acquired business and assets;

•	our management may be reassigned from overseeing existing operations by the need to integrate the acquired business;

•	we may encounter unforeseen difficulties in extending internal control and financial reporting systems at the newly acquired business;

•	we may fail to successfully implement technological integration with the newly acquired business or may exceed the capabilities of our technology infrastructure and applications;

•	we may not be able to generate adequate returns;

•	we may encounter and fail to address risks or other problems associated with or arising from our reliance on the representations and warranties and related indemnities, if any, provided to us by the sellers of acquired companies and assets;

•	we may suffer adverse short-term effects on operating results through increased costs and may incur future impairments of goodwill associated with the acquired business;

•	we may be required to increase our leverage and debt service or to assume unexpected liabilities in connection with our acquisitions; and

•	we may encounter unforeseen challenges in entering new markets in which we have little or no experience.

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

•	limitations on our ability to successfully identify any strategic acquisitions or business opportunities and to compete for these opportunities with others who have greater resources;

•	our possible inability to generate sufficient liquidity, margins, EPS, cash flow and working capital from our operating segments;

•	our dependence on distributions from our subsidiaries to fund our operations and payments on our obligations;

•	the impact on our business and financial condition of our substantial indebtedness and the significant additional indebtedness and other financing obligations we may incur;

•

the impact of covenants in the Certificates of Designation governing HC2’s preferred stock, the indenture governing the notes, the Credit and Security Agreement governing the DBM Global Facility (as defined herein), the CWind Limited line of credit with Barclays, the ANG term loans and notes with Signature Financial, Pioneer Savings Bank and M&T Bank, the Broadcasting Bridge Loan and future financing agreements on our ability to operate our business and finance our pursuit of acquisition opportunities;

•	our dependence on certain key personnel, in particular, our Chief Executive Officer, Philip Falcone;

•	uncertain global economic conditions in the markets in which our operating segments conduct their businesses;

•	the ability of our operating segments to attract and retain customers;

•	increased competition in the markets in which our operating segments conduct their businesses;

•	our expectations regarding the timing, extent and effectiveness of our cost reduction initiatives and management’s ability to moderate or control discretionary spending;

•	management’s plans, goals, forecasts, expectations, guidance, objectives, strategies and timing for future operations, acquisitions, synergies, asset dispositions, fixed asset and goodwill impairment charges, tax and withholding expense, selling, general and administrative expenses, product plans, performance and results;

•	management’s assessment of market factors and competitive developments, including pricing actions and regulatory rulings;

•	the impact of additional material charges associated with our oversight of acquired or target businesses and the integration of our financial reporting;

•	the impact of expending significant resources in considering acquisition targets or business opportunities that are not consummated;

•	our expectations and timing with respect to our ordinary course acquisition activity and whether such acquisitions are accretive or dilutive to shareholders;

•	our expectations and timing with respect to any strategic dispositions and sales of our operating subsidiaries or businesses that we may make in the future and the effect of any such dispositions or sales on our results of operations;

•	the possibility of indemnification claims arising out of divestitures of businesses;

•	tax consequences associated with our acquisition, holding and disposition of target companies and assets;

•	the effect any interests our officers, directors, stockholders and their respective affiliates may have in certain transactions in which we are involved;

---

•	our ability to effectively increase the size of our organization, if needed, and manage our growth;

•	the potential for, and our ability to, remediate future material weaknesses in our internal controls over financial reporting;

•	our possible inability to raise additional capital when needed or refinance our existing debt, on attractive terms, or at all; and

•	our possible inability to hire and retain qualified executive management, sales, technical and other personnel.

•	its ability to realize cost savings from expected performance of contracts, whether as a result of improper estimates, performance, or otherwise;

•	potential impediments and limitations on our ability to complete ordinary course acquisitions in anticipated time frames or at all;

•	uncertain timing and funding of new contract awards, as well as project cancellations;

•	cost overruns on fixed-price or similar contracts or failure to receive timely or proper payments on cost-reimbursable contracts, whether as a result of improper estimates, performance, disputes, or otherwise;

•	risks associated with labor productivity, including performance of subcontractors that DBMG hires to complete projects;

•	its ability to settle or negotiate unapproved change orders and claims;

•	changes in the costs or availability of, or delivery schedule for, equipment, components, materials, labor or subcontractors;

•	adverse impacts from weather affecting DBMG’s performance and timeliness of completion of projects, which could lead to increased costs and affect the quality, costs or availability of, or delivery schedule for, equipment, components, materials, labor or subcontractors;

•	fluctuating revenue resulting from a number of factors, including the cyclical nature of the individual markets in which our customers operate;

•	adverse outcomes of pending claims or litigation or the possibility of new claims or litigation, and the potential effect of such claims or litigation on DBMG’s business, financial condition, results of operations or cash flow; and

•	lack of necessary liquidity to provide bid, performance, advance payment and retention bonds, guarantees, or letters of credit securing DBMG’s obligations under bids and contracts or to finance expenditures prior to the receipt of payment for the performance of contracts.

•	its ability to realize cost savings from expected performance of contracts, whether as a result of improper estimates, performance, or otherwise;

•	the possibility of global recession or market downturn with a reduction in capital spending within the targeted market segments in which the business operates;

•	project implementation issues and possible subsequent overruns;

•	risks associated with operating outside of core competencies when moving into different market segments;

•	possible loss or severe damage to marine assets;

•	vessel equipment aging or reduced reliability;

•	risks associated with operating two joint ventures in China (i.e., Huawei Marine Systems Co. Limited, a Hong Kong holding company with a Chinese operating subsidiary and SB Submarine Systems Co. Ltd.);

•	risks related to noncompliance with a wide variety of anti-corruption laws;

•	changes to the local laws and regulatory environment in different geographical regions;

•	loss of key senior employees;

•	difficulties attracting enough skilled technical personnel;

•	foreign exchange rate risk;

•	liquidity risk; and

•	potential for financial loss arising from the failure by customers to fulfill their obligations as and when these obligations come due.

•	automobile and engine manufacturers’ limited production of originally manufactured natural gas vehicles and engines for the markets in which ANG participates;

•	environmental regulations and programs mandating the use of cleaner burning fuels;

•	competition from oil and gas companies, retail fuel providers, industrial gas companies, natural gas utilities and other organizations;

•	the infrastructure for natural gas vehicle fuels;

•	the safety and environmental risks of natural gas fueling operations and vehicle conversions;

---

•	our Energy segment’s ability to implement its business plan in a regulated environment;

•	the adoption, modification or repeal in environmental, tax, government regulations, and other programs and incentives that encourage the use of clean fuel and alternative vehicles;

•	demand for natural gas vehicles;

•	advances in other alternative vehicle fuels or technologies, or improvements in gasoline, diesel or hybrid engines; and

•	increases, decreases and general volatility in oil, gasoline, diesel and natural gas prices.

•	our expectations regarding increased competition, pricing pressures and usage patterns with respect to ICS’s product offerings;

•	significant changes in ICS’s competitive environment, including as a result of industry consolidation, and the effect of competition in its markets, including pricing policies;

•	its compliance with complex laws and regulations in the U.S. and internationally;

•	further changes in the telecommunications industry, including rapid technological, regulatory and pricing changes in its principal markets; and

•	an inability of ICS’ suppliers to obtain credit insurance on ICS in determining whether or not to extend credit.

•	our Insurance segment’s ability to maintain statutory capital and maintain or improve their financial strength;

•	our Insurance segment’s reserve adequacy, including the effect of changes to accounting or actuarial assumptions or methodologies;

•	the accuracy of our Insurance segment’s assumptions and estimates regarding future events and ability to respond effectively to such events, including mortality, morbidity, persistency, expenses, interest rates, tax liability, business mix, frequency of claims, severity of claims, contingent liabilities, investment performance, and other factors related to its business and anticipated results;

•	availability, affordability and adequacy of reinsurance and credit risk associated with reinsurance;

•	extensive regulation and numerous legal restrictions on our Insurance segment;

•	our Insurance segment’s ability to defend itself against litigation, inherent in the insurance business (including class action litigation) and respond to enforcement investigations or regulatory scrutiny;

•	the performance of third parties, including distributors and technology service providers, and providers of outsourced services;

•	the impact of changes in accounting and reporting standards;

•	our Insurance segment’s ability to protect its intellectual property;

•

general economic conditions and other factors, including prevailing interest and unemployment rate levels and stock and credit market performance which may affect, among other things, our Insurance segment’s ability to access capital resources and the costs associated therewith, the fair value of our Insurance segment’s investments, which could result in impairments and other-than-temporary impairments, and certain liabilities;

•	our Insurance segment’s exposure to any particular sector of the economy or type of asset through concentrations in its investment portfolio;

•	the ability to increase sufficiently, and in a timely manner, premiums on in-force long-term care insurance policies and/or reduce in-force benefits, as may be required from time to time in the future (including as a result of our Insurance segment’s failure to obtain any necessary regulatory approvals or unwillingness or inability of policyholders to pay increased premiums);

•	other regulatory changes or actions, including those relating to regulation of financial services affecting, among other things, regulation of the sale, underwriting and pricing of products, and minimum capitalization, risk-based capital and statutory reserve requirements for our Insurance segment, and our Insurance segment’s ability to mitigate such requirements;

•	our Insurance segment’s ability to effectively implement its business strategy or be successful in the operation of its business;

•	our Insurance segment’s ability to retain, attract and motivate qualified employees;

•	interruption in telecommunication, information technology and other operational systems, or a failure to maintain the security, confidentiality or privacy of sensitive data residing on such systems;

•	medical advances, such as genetic research and diagnostic imaging, and related legislation; and

•	the occurrence of natural or man-made disasters or a pandemic.

---

•	our Life Sciences segment’s ability to invest in development stage companies;

•	our Life Sciences segment’s ability to develop products and treatments related to its portfolio companies;

•	medical advances in healthcare and biotechnology; and

•	governmental regulation in the healthcare industry.

•	our Other segment’s ability to integrate our recent and pending broadcasting acquisitions;

•	our Other segment’s ability to operate in highly competitive markets and maintain market share;

•	our Other segment’s ability to effectively implement its business strategy or be successful in the operation of its business;

•	new and growing sources of competition in the broadcasting industry; and

•	FCC regulation of the television broadcasting industry.

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

•	$0.4 million payable every month during calendar year 2018

•	$0.6 million payable every month during calendar years 2019 to May 2021 inclusive;

•	Profit-related component. The Company will pay 10% of profits after tax before dividends. This will be paid up to two years following the year end to enable budgeting and cash flow control

•	Dividend-related component. The Company will pay a cash sum equal to 50% of any future dividend payments.

•	ex-CARE employees contributing between 2.5% and 7.5% and the employer contributing at a matching rate plus an additional 5% fixed contributions; and

•	defined contribution employees contributing between 2% and 7.5% and the employer contributing at a matching rate.

•	Maintain employer contributions to 20% of pensionable salaries to September 30, 2016, and then no more contributions thereafter.

---

•	Seven annual contributions of less than $0.1 million from December 31, 2014 to 2020.

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

---

1.	I have reviewed this Annual Report on Form 10-K of HC2 Holdings, Inc.;

2.	Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.	Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.	The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a)	Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

b)	Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

c)	Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

d)	Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.	The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

a)	All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

b)	Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

1.	I have reviewed this Annual Report on Form 10-K of HC2 Holdings, Inc.;

2.	Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3.	Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4.	The registrant’s other certifying officer(s) and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

a)	Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

b)	Designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

c)	Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

d)	Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5.	The registrant’s other certifying officer(s) and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrant’s board of directors (or persons performing the equivalent functions):

a)	All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

b)	Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.